Hozelock Round Tap and Mixer Spout Hose Connector - 2176
Stock Availability:
0
SKU:
HZL2176
$13.73
Supplying 75% of the garden watering market in Great Britain
Clamps onto a plain tap spout or plain round or oval parallel sided mixer spout (minimum 16mm - maximum 19mm diameter).
Strong clamp fit. Easy to install and remove as required.
Please note: Not recommended with trigger guns & high water pressure
In your apartment use with the Hozelock Pico Reel 2425
Supplying 75% of the garden watering market in Great Britain
Hozelock 2176 Round Tap and Mixer Spout connector (for spout diameter, min 16mm - max 19mm diam)
Features:
- Allows you to connect a garden hose, fitted with a hose end connector of the international standard click-on system, to the mixer spout. This connector system is common on garden hoses around the world. It is not designed for the non-standard Gardena Maxi-Flow System. For 18-19mm ID garden hose you will also need Hozelock 2060 hose end connector.
- Designed for round and oval spout taps and mixer spouts
- Spout diameter range: Minimum 16mm - maximum 19mm diameter parallel sided round spout.
- The fitting is sealed to the tap or mixer spout by tightening the strong finger-friendly stainless steel clip.
- Please Note: Do not use in conjunction with a hose trigger gun fitted to the hose end if you have high water pressure.
See our full range of kitchen, bathroom & laundry mixer spout and plain tap connector adaptors.
Write Your Own Review