Firestone Lap Sealant HS - 325ml cartridge W56-358-703E
Designed to give additional sealing and mechanical protection to the exposed edges of Firestone QuickSeam FormFlash & the finishing edge of Termination Bars.
See Technical Information Category for details.
Designed to give additional sealing and mechanical protection to the exposed edges of Firestone QuickSeam FormFlash, after minimum 4hrs from time of FormFlash installation & preferably before the end of the working day to reduce the chance of contamination.
Also used to cover the exposed edge after Firestone PondGard EPDM has been adhered to a concrete substrate with Firestone Bond Adhesive, Firestone Water Block Seal(S-20) and mechanically fastened Firestone Termination Bar or similar which has been screwed along the edge.
Coverage: 7 lin. m. per cartridge. Thinning is not allowed.
- Excellent resistance to ozone, UV & general weathering
- Excellent resistance to heat, cold & water
- Good adhesion to Firestone EPDM Geomembrane sheet, metals, wood & concrete
- Good slump resistance
For more information refer to the Technical Information Sheet (TIS) in Firestone Lining Systems - Installation Guidelines.
Back to our Firestone EPDM Rubber Pond & Dam Liner main page.